Title

Authors

On the preliminary design of passive tuned dampers tor reduce wind induced accelerations

Vickery, B.

Reduction of wind-induced vibration of tall buildings using suspended mass pendulums

Yau, J-D., Hsu, T-C., Tuan, A.

The role of non-linear damping in response estimation

Jeary, A.

Discussion paper: Structural damping

Aurelius, L., Rofail, A.

First steps towards a national assessment of Australian wind risk

Nadimpalli, K., Edwards, M., Cechet, B.

Severe wind hazard/vulnerability modelling workshop

Cechet, B., Edwards, M., Holmes, J.

Codification of wind loads on highway noise barriers

Holmes, J., Bhavnagri, V.

Introduction of AS/NZS1170.02 wind actions in New Zealand

King, A.

Wind engineering issues for South Pacific Island Countries

Sharma, R.

Multipliers for orographic lee effects

Reid, S.

Mean drag coefficients for very porous golf driving range netting

Cochran, L.

External wind pressures for a Hong Kong apartment building – wind tunnel test results

Hitchcock, P., Campbell, S., Hui, D., Thepmongkorn, Kwok, K.

Effects of gap-width on a twin deck bridge: Part 1 – Vortex excitation

Fok, A., Kwok, K., Hitchcock, P. Quin, X.

Effects of gap-width on a twin deck bridge: Part 2 – Aerodynamic admittance functions

Fok, A., Kwok, K., Hitchcock, P. Quin, X.

Across-wind force spectra for low values of reduced velocity commonly required for New Zealand buildings

Flay, R., Bhatt, J.

Torsional moments of tall buildings with various planform shapes

Cheung, J., Melbourne, W.

Volume and frequency scaling for internal pressures in wind tunnel tests

Holmes, J.

Inter-tenancy wall design for tall buildings with operable facades

Aurelius, L., Rofail, A.

Analysis of buildng internal pressures

Sharma, R.

Wind induced natural ventilation

Sharma, R.

Permeability measurements on a typical Hong Kong apartment

Hui, D., Hitchcock, P., Kwok, K.

Amplitude dependency of damping in buildings and estimation techniques

Tamura, Y.

Comparison of dynamic characteristics from full scale measurements and finite element models of a tall building

Moore, A., Wood, G.

Full scale measurements of the frequency and damping on the Eureka Tower, Melbourne

Melbourne, W., Wood, G., Eaddy, M.

Building economics of wind-engineering tall structures: Part 1 – Empirical response formulae of corner-modified buildings

Tse, K., Kwok, K., Hitchcock, P., Chan, C., Denoon, R.

Building economics of wind-engineering tall structures: Part 2 – Construction cost and returns on investment

Tse, K., Kwok, K., Hitchcock, P., Chan, C., Denoon, R.

Proposed occupant comfort criteria for tall buildings subjected to wind-induced viration, based on peak and standard deviation acceleraton

Burton, M., Kwok, K., Hitchcock, P.

Survey of metal clad low-ris low pitch sheds in cyclonic regions

Leitch, C., Ginger, J., Henderson, D.

Vulnerability of metal clad low-rise low pitch subject to wind loads

Ginger, J., Henderson, D., Leitch, C.

Numerical modelling of an impinging jet

Mason, M., Wood, G., Fletcher, D.

Wind measurement from a moving yacht

Richards, P., Le Pelly, D.

Inclined concrete residential roofs for hurricane/typhoon protection

Bermudez, F. Henriquez, J.

Practical issues for pedestrian wind comfort prediction: comfort criteria

Banks, D., Denoon, R.

Practical issues for pedestrian wind comfort prediction: surface level speed sensors

Banks, D., Denoon, R.

Outdoor comfort criteria and planning controls for wind

Locke, N., Donn, M., Walton, D.

Developing a static pressure reference probe

Hui, D., Hitchcock, P., Kwok, K.